DeutschEnglish
 Products / Sensors  / Chlorine Dioxide 
back to overview

GE 715 CLO2

gas sensor

Gas-Sensor
Gas-Sensor
  • Amperometric 3 electrode sensor element
  • High resolution
  • High reliability

description

Sensor for measuring Chlorine Dioxide gas

applications

  •  Environmental Monitoring
  •  Ambient Air Monitoring
  •  Drinking Water / Beverages

technical data

measuring parameter

 
Chlorine Dioxide Gas 0 .. 1 ppm (K 100 (W) GAS)

ambient conditions

temperature -20 .. +40 °C
humidity 15 .. 90 % rH (non-condensing)
effect of humidity no effect on zero current

Querempfindlichkeiten
Querempfindlichkeiten

order information

name

description

article number
GE 715 CLO2 sensor for measuring chlorine dioxide gas 29212011K

accessories

assemblies

GSH Gas sensor holder for one sensor of the GE 700 series including 10 m cable.

Download datasheet

All information about this product for your reference
Collect and zip downloads

If you want to download several documents, you can collect and download them as one zipped file to save time

Download collector

There are no files in your download-collector

Chlorine, Chlorine dioxide, Ozone and Hydrogene peroxide...
Three electrodes in one body - our new single-rod sensors add simple installation and handling to all the known advantages of bare-metal sensors:

No delicate parts

No membranes that can tear or clog, no electrolyte that can decompose or leach out. Gold and glass are the materials our sensors are made of. Excellent chemical resistance, uncritical in hygiene requirements, and easy to use.

Quick response

With their electrodes in direct contact with the water, these sensors react quickly to any changes. Their prompt response makes them especially advantageous for control applications.

Excellent zero-point stability

The measured signal is a current resulting from an electrochemical reaction. In absence of the disinfectant this reaction cannot take place. Consequently, the signal automatically drops to zero.

Stain resistant

The 12mm glass electrode and the vertical electrode surfaces offer no target for particles or fibers. The signal is completely unaffected by air bubbles. And in case that something does succeed to stick to the electrodes, our automatic sensor cleaning ASR will deal with that.