DeutschEnglish
 Products / Instruments  / pH/ORP 
back to overview

dialog W 2 CM R

Double conductivity measuring and control instrument

dialog W 2 CM R
dialog W 2 CM R
  • Easy and safe operation by plain text menu guidance
  • Log book function
  • Graphical trend display of the last 3 h
  • Linear and non-linear special pure water temperature compensation

description

The dialog W 2 CM R is a sophisticated instrument for the precise measurement and control of the conductivity (double/ difference measurement). It is available in a wall mounted housing.

applications

  •  Cooling And Boiler Feed Water
  •  Waste Water Treatment
  •  Drinking Water / Beverages
  •  Process Water

particular characteristics

  • Variable assignment of relay and current outputs
  • 2 limit values with delay
  • Dosage check
  • Serial interface RS 485
  • 3 scaleable, galvanically isolated 0/4 .. 20 mA outputs
  • 2 separate PID-controller
  • Real time clock
  • Background illuminated two-line graphical display
  • Password function

information

Measuring and control instruments of the dialog series are also available for 117 VAC and 24 VDC (only wall mounted housing) - wihtout additional charge.

technical data

measuring parameter

 
Conductivity (conductive) 0 .. 200.0 µS/cm
  0 .. 20 MOhm*cm
  0 .. 20.00 µS/cm
  0 .. 200.00 µS/cm
  0 .. 2.000 mS/cm
  0 .. 20.00 mS/cm
  0 .. 200.00 mS/cm

input characteristics

accuracy 1% of range
temperature measuring range -30 .. +140°C
temperature coefficient adjustable 0,0 .. 8,0 % /°C or non-linear

output characteristics

output signal 3 0/4 .. 20 mA (scaleable, galvanically isolated)
load max. 500 Ohm
registration range Free scaleable within the measuring range
serial interface RS 485
 
Baud rate 9600
data format 8 bit


power supply

line voltage 24 / 117 / 230 VAC, +6 / -10 %, 40 .. 60 Hz
optional: 24 VDC
power consumption 10 VA

ambient conditions

ambient temperature operation 0 .. +50°C, storage -20 .. +65°C
relative humidity max. 90% rH at 40°C (non-condensing)
protection class
wall mounted housing IP 65


controller

control response On/off controller (adjustable hysteresis)
P/PI/PID-controller (pulse-pause, pulse-frequency or continous controller output)
relays 3 relays, each with potential-free CO contact, max. 250 V, 6 A, 550 VA
onset delay 0 .. 200 sec till controller active
digital input Controller stop via external contact

certificates and approvals

CE-symbol Declaration of conformity: The product meets the requirements of the harmonized European standards. It thus complies with the legal
requirements of the EC directives.
The manufacturer confirms successful testing of the product by affixing the CE symbol.

mechanical construction - wall mounted housing

material ABS
dimensions 165x160x85 mm
weight 1.25 kg
connection Spring-loaded terminals

dialog W 2 CM R
dialog W 2 CM R

order information

name

description

article number
dialog W 2CM R wall mounted housing, 230 VAC 115140K

accessories

accessories

PKV 30-DPS Converter for PROFIBUS-DP for max. 32 instruments of the K 100 oder dialog series. Converting of RS 485 to PROFIBUS-DP interface, instrument in a housing for installation on a top hat trail, dimension 105 X 105 x 80 mm (HxBxT), connectioncable inclusive
S-341 data logger The bus data logger S-341 on the base of the RS-485 with Kuntze protocol reads, shows, and stores measuring data of up to 10 Kuntze instruments with up to 8 parameters each.

Download datasheet

All information about this product for your reference
Collect and zip downloads

If you want to download several documents, you can collect and download them as one zipped file to save time

Download collector

There are no files in your download-collector

K 100. Purposive meter and controller…
For the purposive measurement and control of a single parameter, the K 100 is the right choice. With temperature measurement and compensation, bidirectional PI controller with alarm function, one analog output and optionally serial interface.

Easy operation…

Text menu. Text messages for status and alarm. Indication of controller relay status. Simple manual operation of the relays.

Value for money…

Analog output, controller with two relays, additional alarm relay, external controller stop, and much more – all inclusive and ready-to-use.

Fits in very well…

Choose between wall-mounting housing with IP65 and panel-mounting housing 96x96mm.

dialog. Versatile meter and controller...
Large graphical display, trend indication, log book, text menu. Two PID controllers, three analog outputs, and serial interface.

Redundance spells security...

Reliable process control. With the dialog´s double measurement function you will immediately recognise sensor faults.

Ratio spells efficiency...

Surveillance of treatment processes. Monitor the efficiency of your ion exchangers via conductivity reduction using the dialog´s difference measurement function.

Combination spells compensation...

Independence of interferences. For disinfection with Chlorine, the pH value plays an important role. With the dialog you can measure and control Chlorine and pH simultaneously, and automatically compensate the pH influence on the Chlorine measurement.